中国·yl23411永利-www.yl23411.com|官网登录

        

        SGR1103黑液专用阻垢分散剂是由有机膦酸盐、膦羧酸、聚羧酸类阻垢分散剂、降粘剂、表面活性剂等组成。该产品能有效的抑制碳酸盐、锈蚀产物、硫酸盐或硅酸盐等结垢。作为最新研发的高性能阻垢分散剂，它可以同时与黑液中的硅、草酸盐、各种糖类发生反应使其失去粘性，使之不易在蒸发器表面沉淀附着。分散剂还会与蒸发器表面所结污垢发生化学反应，使老垢溶解脱落，达到清除老垢的目的。保证了蒸发器表面清洁无垢，提高热传导速度，增效节能，效益明显。

一、黑液蒸发器阻垢剂性能特点：

    广谱性:对抑制碳酸盐、锈蚀产物、硫酸盐或硅酸盐的析出或沉淀有很好的效果。

    降粘性:使黑液中的钙、镁、硅等成垢离子最大限度的分散，增加抗沉淀性和流动性，使之不宜在蒸发器表面沉淀附着，而保持蒸发器表面清洁无垢。

    运行除垢:与蒸发器表面所结污垢发生化学反应，使老垢溶解脱落，达到清除老垢的目的。

二、黑液蒸发器阻垢剂理化指标：

将SGR1103黑液专用阻垢分散剂在加药罐中稀释后通过计量泵，按计量随黑液一起加入蒸发器中。此药剂稀释后不宜久存，应现用现配。一般用量为20～50克/吨黑液。

包装与贮存

    SGR1103黑液专用阻垢分散剂为塑料桶包装，每桶25kg或由用户确定。贮存期为十二个月。

安全与防护

    SGR1103黑液专用阻垢分散剂为中性或弱碱性，操作时佩戴眼镜手套，避免与皮肤、眼睛等接触，接触后用大量清水冲洗。

近三年部分客户使用案例

客户名称	采购药剂
江河纸业股份有限公司	黑液专用阻垢分散剂
武汉晨鸣汉阳纸业股份有限公司	黑液专用阻垢分散剂
赤壁晨鸣纸业有限责任公司	黑液专用阻垢分散剂
湛江晨鸣浆纸有限公司	黑液专用阻垢分散剂
山东晨鸣纸业集团股份有限公司	黑液专用阻垢分散剂
平原方源纸业有限公司	黑液专用阻垢分散剂

---

SGR-1103

1. Product introduction

 MVR evaporation scale inhibitor is composed of organic phosphonates, phosphonate carboxylic acid, polycarboxylic acid scale inhibitor dispersion agent, viscosity reduction agent, surfactants, etc. The product can effectively slow down the scale of carbonate, rust products, sulfate or silicate. Through chelating capacity enhancement and lattice rhetoric, the agent can achieve scale resistance. The dispersant will also chemically react with the dirt on the surface of the evaporator, so that it is not easy to precipitate and attach on the surface of the evaporator and peel off the old scale. Ensure the surface cleaning of the evaporator, improve the heat conduction speed, and prolong the service life and cleaning cycle of the equipment.

It is effective to inhibiting the precipitation or precipitation of carbonate, rust products, sulfate or silicate.

2. Performance indicators

3. Methods of use

The SGR-1103 special scale resistance dispersant is diluted in the dosing tank through the metering pump, and it is added to the evaporator together with the papermaking wastewater according to the measurement, or the stock liquid can also be added directly. The general dosage is from 30 to 50 ppm.

4. Packaging and storage and transportation

(1) This product is packaged in plastic bucket, 25 Kg / barrel, 1t / barrel or determined according to customer needs.

(2) The product is stored in a dark, ventilated warehouse, and far away from the fire and high temperature, the storage temperature should not exceed 30℃.

(3) with flammable, combustible, acid, alkali and other substances, avoid mixed storage.

(4) The storage area shall be equipped with leakage emergency treatment equipment and suitable receiving materials.

5. Safety and protection

(1) Avoid inhalation and feeding, operators must wear protective glasses, acid-alkali proof gloves, protective masks and working caps, and wear acid-alkali proof protective clothing when necessary.

(2) Do not eat or drink water during work, pay attention to ventilation or local air exhaust, and wash hands with soap and water after work.

(3) Prevent collision during loading and unloading, pay attention to sealing, and prevent damage to packaging and containers.

(4) In the loading and unloading process, brutal loading and unloading should be prohibited to ensure that the container does not leak, collapse, fall or damage, and prevent the solution from splashing out in the loading and unloading process.